Email: sales@mytmachine.com
Tel: +86-15951670606
Room 1803, 2nd, 2501 Lane, Guyang North Road, Songjiang District, Shanghai, China
Using the shearing machine for a long time will inevitably cause some problems, but as an operator, we should learn to solve some common small problems, so that it will not affect our use! So what are our common problems?
1. Motor problem
The shearing machine cannot be turned on, the machine fails to operate correctly, or the motor is trembling, does not respond, or it still ends after being turned on. There are two solutions and judgments for similar situations in daily life. Replace the motor or use professional testing tools. Check whether the transmission parts are stuck during the operation of the shearing machine.
2. Control system problem
The machine can operate normally, but the machining accuracy cannot be guaranteed, and deviations often occur. In this regard, we can habitually check whether the running parts are loose. Unintentionally, there will be abnormal noises from the side switch at some time, or can not be classified according to the normal method. It is very likely that the parts are loose or damaged, which is in the halving process. If it often happens that the shearing machine equipment fails to cut effectively, it is necessary to first try the stroke limit switch set by the shearing machine and whether the eccentric wheel and other equipment are operating normally.